Enlace Telemetry
Your network is talking.Now you can listen.
Enlace reads the telemetry your OLTs already produce — read-only — and turns it into early warnings: fibre faults, degrading signal, ghost connections, churn risk. 12+ OLT vendors. 60-second intervals. One 8.7 MB static binary.
Enlace is the first product from Pulso Technologies, a UK telecom-technology startup. We're pre-launch — onboarding a small number of fibre operators as validation partners.
8.7 MB
Binary size
12+
OLT vendors
60s
Poll interval
0.12s
1,000-ONT audit
5
Protocols
0
Credentials sent
Figures from internal validation.
THE PROBLEM
Your NOC is reactive.Your customers know before you do.
Before
- Customer calls with complaint
- Technician dispatched blind
- Signal degrading undetected for weeks
- No per-ONT visibility
- Truck roll: £80–150 each
- 15–25% are 'no fault found'
After
- Per-ONT monitoring every 60 seconds
- Tech gets diagnosis before customer calls
- Continuous failure prediction
- Dashboard with signal, distance, trend
- 70% of calls resolved by help desk
- Churn risk scored before the customer calls
HOW IT WORKS
One binary. Five minutes.From blind to predictive.
Install
One command. Under 10 seconds.
Configure
One TOML file. Add your OLTs, set the interval, done.
Collect
The agent connects to each OLT using the right protocol and pulls per-ONT data.
Connect
Data flows to Elasticsearch, Slack, and webhooks. Plug into what you already use.
CAPABILITIES
17 intelligence modules.Six highlighted here. Each one replaces a manual process.
Fault Detection
Fibre cut vs power outage. Multi-ONT correlation on the same PON port. Instant classification.
Per-cycle detection
Learn more ↓
Signal Prediction
Linear regression on dBm history. Continuous failure forecast per ONT.
Continuous forecast
Learn more ↓
Churn Scoring
Degrading signal + micro-dropouts = estimated 90-day churn probability and revenue at risk — with every assumption stated inline.
Assumptions stated
Capacity Planning
PON port utilisation tracking. Watch above 50% when filling within 6 months; warning above 75%, critical above 90%.
Months-to-full forecast
Learn more ↓
Multi-Vendor
Huawei, ZTE, FiberHome, Adtran, Nokia, Datacom + more. One dashboard.
12+ vendors
Learn more ↓
Real-time Diagnostics
Per-ONT signal level, distance, status, temperature. Customer health card for the help desk.
60s intervals
Learn more ↓
VENDOR SUPPORT
12+ OLT vendors.Every protocol. One agent.
| Vendor | Models | Protocols |
|---|---|---|
| Huawei | MA5800-X2/X7, MA5600T | SNMP + SSH + NETCONF |
| ZTE | C320, C300, C600, C650 | SNMP + SSH |
| FiberHome | AN5516, AN6001 | SNMP + SSH |
| Adtran | SDX 6320 | NETCONF/YANG + SNMP + CSV import |
| Datacom | DM4610, DM4615 | SNMP + NETCONF |
| Nokia | ISAM/Lightspan | SNMP + NETCONF |
| Parks | FiberLink 200/300/400 | SNMP + SSH |
| Intelbras | G08, G16 | SNMP + SSH |
| Partial support | ||
| BDCOM | GP3600 | SNMP + SSH |
| VSOL | V1600D | SNMP + SSH |
| CDATA | FD1604S | SNMP |
| Ubiquiti | UFiber | REST API |
| Also collected | ||
| MikroTik | — | RouterOS API (PPPoE, BGP, traffic) |
| RADIUS | — | UDP 1813 (sessions, bytes, duration) |
| TR-069 CPE | — | GenieACS API (WiFi, SNR, devices) |
Validated collection paths today: SNMP v2c/v3, NETCONF, RouterOS API, passive RADIUS, and TR-069 (GenieACS). SSH CLI and gRPC streaming are implemented but still in validation against real firmware.
TRUST
Read-only & verifiable.No lock-in by design.
Read-only — the agent never writes to your kit
Your credentials stay on your network
Vendor-agnostic via open standards (SNMP/NETCONF) — no single-vendor lock-in
Your data stays yours
We'll walk your engineers through exactly what the agent does — read-only — so they can verify it without us handing over source
COMPARISON
Calix Cloud charges per subscriber.And only works with Calix hardware.
| Feature | Calix Cloud | Enlace |
|---|---|---|
| OLT vendors | Calix only | 12+ vendors |
| Per-ONT telemetry | Yes | Yes |
| Predictive maintenance | Yes | Yes |
| Read-only / no lock-in | Closed | Yes — open standards |
| Vendor lock-in | Total | None |
| Pricing model | Per subscriber | Free pilot at launch |
| Install | Cloud onboarding project | One command, minutes |
| Credentials & management | Live in the vendor cloud | Stay on your network |
LAUNCH PARTNERS
Free pilot for launch partners
We're onboarding a small number of fibre operators to validate Enlace on real networks — free during the pilot, with preferential pricing at launch.
Your network has the data.Stop flying blind.
See an example of what Enlace finds, then request a pilot to run it against your own network.